：
Note
Please confirm that the all the PD devices are complying with IEEE802.3af/at standard.
!
output), please use AC110~245V, 50/60Hz power supply;
Power Industrial Terminals
: 48 (46 ~57V)VDC, dual redundancy ( More than 50VDC recommended when used PoE+
Indicator Description:
Indicator
Status
Description
Power Indicator: SYS
Green LED ON
Normal
PoE
Indicator:
PoE
100M Indicator: Link
OFF
Power OFF
Green LED ON
Connected PD Device, working properly
Green LED Blink
Short circuit or current overload
OFF
No Connected PD or Power OFF
Yellow LED Blink
Data transmission work properly
Yellow LED ON
Connected with 10Mbps or 100Mbps
network device
OFF
No connected PD
Green LED Blink
Green LED ON
OFF
Data transmission work properly
Connected with 1000Mbps network device
No connected PD
Gigabit Indicator: Link
PoE Port
: The PoE ports support PoE function, which can transmit data and provide power simultaneously if matching
device is connected . The LED lights on the front panel can show working status of each port.
Ethernet Port
: beside PoE port, other ports are Ethernet RJ45 port, and all RJ45 port support Auto MDIMDIX, plug and
play.The LED lights on the front panel can show working status of each port.
!
Installation Guide
Please install with the supported devices.
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+
、
3/6-( End -span)/ 4/5+
、
7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification on the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table.
2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3. Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the
system restoration is successful.
2.Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!
Note
Connection Diagram
www.onvcom.com
Tel:+86-755-33376606 Fax:+86-755-33376608 Email:[email protected]
Address: Room 1003, Block D , Terra building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
Model
Descriptions
and
Installation
ONV-IPS31008P :
8x 10/100M ports +1x
+ 1x 10/100/1000M SFP optical port PoE switch,1-8 port
supports PoE, IEEE 802.3af, Each port power is 15.4W, the whole power is 120W, network port transmission distance is
100m, the SFP optical module transmission distance is 20-120Km.35mm rail-mounted design.
ONV-IPS31008PFM
: 8x 10/100M ports +1x
Gigabit Ethernet port
+1x 10/100/1000M SFP optical port smart managed
PoE switch, support SNMP network protocols, 1-8 port supports PoE function, IEEE 802.3af, each port power is 15.4W, the
whole power is 120W, network port transmission distance is 100m, and the SFP optical module transmission distance is 20-120 Km.
35mm rail-mounted design.
ONV-IPS31008PF-at
: 8x 10/100M ports +1x
Gigabit Ethernet port
+1x 10/100/1000M SFP optical port PoE switch, 1-8 port supports
PoE, IEEE 802.3at, Each PoE port power can be up to 30W,the whole power is 240W, network port transmission distance is 100m,
the SFP optical module transmission distance is 20-120Km.35mm rail-mounted design.
ONV-IPS31008PFM-at
: 8x 10/100M ports +1x
Gigabit Ethernet port
+1x 10/100/1000M SFP optical port smart managed PoE switch,
support SNMP network protocols, 1-8 port supports PoE, IEEE 802.3at, Each PoE port power can be up to 30W,the whole power is
240W, network port transmission distance is 100m, the SFP optical module transmission distance is 20-120Km.35mm railmounted design.
F
Gigabit Ethernet port
Ind
ustr
ial
PoE
Sw
itch
IPS
310
08P
F
W
ide
Are
a N
etw
ork
PoE
(Da
ta+
Pow
er)
