Ontech GSM Mini 9009, Руководство пользователя

Страница: 20 / 36

-20-
Get started
You must have an installed Ontech GSM Mini 9009 (master unit) in order to
communicate with one ore more Ontech GSM Relay 9010 (slave unit).
The identity of the unit
In a system with one master unit and one or more slave units it is of utmost
importance that all units has different ID numbers
The master unit always has ID1. The slave units ID can be set from ID2 up to ID8.
No unit may have ID0.
When the slave unit is delivered factory setting is ID2.
SETTING ID ON THE SLAVE UNIT
•
WARNING. During this operation the unit must be disconnected from all
forms of power.
•
Unscrew the four screws on the back of the unit.
•
Remove the back cover gently.
•
Locate the DIP-switch (see below)
•
Switch 6, 7 and 8 is used to set the identity. Se table below.
•
Use a small screwdriver to change position on desired switch.
•
Replace the back cover.
•
Replace the four screws.