Ontech GSM Mini 9009, Руководство пользователя

Страница: 12 / 36

-12-
Alarmrelay
This function turns the relay ON if the alarm on the unit or one of the slaves is
activated. For example you can connect a siren that starts when an alarm is
activated
•
The function is activated by adding a record named ”ALARMRELAY” in
Contacts on the SIM-card. See page 6
•
The function is deactivated by deleting the record ”ALARM RELAY” in
Contacts on the SIM-card. See page 6.
Turn on/off the alarm function
Every time the unit is started up the alarm function is turned on after 60 seconds.
The reason for this is that you will have time to for example close a door that is
alarmed. If you want you can turn off the alarm function.
Turn off the alarm function by calling up
1. Call up the unit. Be sure you use tone mode on the telephone.
2. The unit answers with a beep.
3. Press your PIN-code and then #.
Example:
1234#
If the PIN-code is correct the unit replies with a beep. If it is not correct the
call is disconnected. Call again and try.
4. Turn off the alarm function by pressing buttons
7*0# . The unit replies with a beep. Hang up the receiver. If the unit replies
with two beeps, try again.
5. Turn on the alarm function by pressing buttons
7*1# . The unit replies with a beep. Hang up the receiver. If the unit replies
with two beeps, try again.
Turn off the alarm function with SMS
1. Send an SMS with the following message:
ABCD#7*0# (where ABCD is your PIN-code)
2. Turn on the alarm function again by sending an SMS with the following
message:
ABCD#7*1# (where ABCD is your PIN-code)
Tip!
If you not are sure about the settings of the unit you can send an SMS and ask for
status. See page 15. When the alarm function is turned on, a star (*) before the
name Ontech 9009 appears in the SMS. Like this”*Ontech9009”.