background image

HOBO® Temp/RH 2.5% Data Logger (UX100-011) Manual 

16210-G 

The HOBO Temp/RH data logger records temperature and relative humidity (within 2.5% 
accuracy) in indoor environments with its integrated sensors. Using HOBOware®, you can easily 
configure the logger alarm to trip for specific high or low sensor readings. Or, you can set up burst 
logging in which the logger records data at a different interval during certain conditions. The 
logger can also calculate minimum, maximum, average, and standard deviation statistics. This 
compact data logger has a built-in LCD screen to monitor the current temperature, relative 
humidity, logging status, battery use, and memory consumption in between readouts. 

Specifications 

Temperature Sensor 

 

Range 

-20° to 70°C (-4° to 158°F) 

Accuracy 

±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), see Plot A 

Resolution 

0.024°C at 25°C (0.04°F at 77°F), see Plot A 

Response Time 

4 minutes in air moving 1 m/s (2.2 mph) 

Drift 

<0.1°C (0.18°F) per year 

RH Sensor 

 

Range 

1% to 95% (non-condensing) 

Accuracy 

±2.5% from 10% to 90% typical to a maximum of ±3.5% including 
hysteresis, see Plot B 

Resolution 

0.05% at 25°C (77°F) 

Response Time 

11 seconds to 90% in airflow of 1 m/s (2.2 mph) 

Drift 

<1% per year typical 

Logger 

 

Logger Operating Range 

Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing) 
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification 

Logging Rate 

1 second to 18 hours, 12 minutes, 15 seconds 

Logging Modes 

Fixed interval (normal), burst, or statistics 

Memory Modes 

Wrap when full or stop when full 

Start Modes 

Immediate, push button, date & time, or next interval 

Stop Modes 

When memory full, push button, or date & time 

Restart Mode 

Push button 

Time Accuracy 

±1 minute per month at 25°C (77°F), see Plot C 

Power Source 

One 3V CR2032 lithium battery and USB cable 

Battery Life 

1 year, typical with logging rate of 1 minute and sampling interval of 
15 seconds or greater 

Memory 

128 KB (84,650 measurements, maximum) 

Download Type 

USB 2.0 interface 

Full Memory Download Time 

20 seconds 

LCD 

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly 
or go blank in temperatures outside this range 

Size 

3.66 x 8.48 x 2.29 cm (1.44 x 3.34 x 0.9 in.) 

Weight 

30 g (1.06 oz) 

Environmental Rating 

IP50 

 

The CE Marking identifies this product as complying with all relevant 
directives in the European Union (EU). 

 

 

 

HOBO Temp/RH 2.5% 
Data Logger 

UX100-011 

Included Items: 

 

Command™ strip 

 

Double-sided tape 

 

Hook & loop strap 

Required Items: 

 

HOBOware 3.4 or later 

 

USB cable (included with 
software) 

 

Содержание UX100-011









Отзывы: