onset
®
POWER MONITORING
INSTALLATION GUIDE
14724-D
PAGE 4
© 2011–2013 Veris Industries and Onset Computer Corporation
Veris and the Veris “V” logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Onset, HOBO, HOBOware, and HOBOlink are trademarks or registered trademarks of Onset Computer Corporation.
WIRING
To avoid distortion, use parallel wires for control power and voltage inputs.
The following symbols are used in the wiring diagrams on the following pages.
Symbol
Description
Voltage Disconnect Switch
Fuse (installer is responsible for ensuring
compliance with local requirements. No fuses
are included with the meter.)
Earth ground
Current Transducer
Potential Transformer
Protection containing a voltage disconnect
switch with a fuse or disconnect circuit breaker.
The protection device must be rated for the
available short-circuit current at the connection
point.
www.
.com
1.800.561.8187