OnQ Technologies HMS 1100 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 88

background image

Page 45

The display will show all areas that have been enabled for that user. After the area(s) is/are selected, press the ' # ' key.

CODE 2 AREAS:

1 2 0=CLR

You can specify the access (on/off) times for the code; this is, the time periods during which the code is valid.

CODE

2

ON

TIME:

8:00 AM MTWTF-- #=CHNG

CODE

2

OFF

TIME

5:00 PM MTWTF-- #=CHNG

The times and days are changed by pressing the ' # ' key. Choose the 1 (TIME) key to change the On or Off times. You will be
prompted to enter the new time. AM/PM must be specified for the time if the AM/PM format is being used, otherwise the entered
time should be 13:00-23:59. Each item defaults to its current value. Press the up arrow key to select Sunrise and press the down
arrow key to select Sunset.

CODE 2(ON/OFF)TIME:

1=TIME

2=DAYS

TIME: 8:00 AM

HHMM

↑

=RISE/AM

↓

=SET/PM

To change days, press the ' # ' key, then press the 2 (DAYS) key. You will be prompted to enter the day(s) that the code will be
valid. Press 1-7 for Monday - Sunday, 0 for Never, 8 for Weekdays, and 9 for Weekends.

DAY(S):

MTWTFSS

1-7=MON-SUN

0=NEVER

Duress Code

If you are forced to disarm the system against your will by an intruder, disarm it as you normally would, but use the Duress Code
instead of your normal code. The system will disarm normally. No sirens will sound, no lights will flash, but the HMS 1100 will
perform a silent dial out and say that this is a silent alarm.

To stop a silent dial out, turn your security system off by pressing OFF, then your code.

DURESS CODE:

0000-9999

0000=DISABLE

↑

Set Up Time

To set up time and date, from the Setup menu, press the 2 (TIME) key. You will be prompted to enter the new time
and date.

AM/PM must be specified for the time if that format is being used, otherwise the entered time should be 13:00-23:59.

TIME:

HHMM

↑

=AM

↓

=PM

DAYLIGHT

SAVINGS

TIME?

0=NO

1=YES

If Daylight Savings Time is currently being observed (between spring and fall), set this item to "Yes". If Daylight Savings Time
is not currently being observed (between fall and spring) or is not observed in your geographic location, set this item to "No".
This item is used to correctly calculate the times for sunrise and sunset.

You are only asked this question when you set the time. Once the time is set, HMS 1100 will automatically adjust the "time of
day" each time daylight savings time begins and ends.

ENTER

DATE:

MMDDYY

«
...
51
52
53
54
55
...
»

Содержание HMS 1100

























































































Отзывы:

Нет отзывов

Похожие инструкции для HMS 1100

Бренд: A.E.B. Страницы: 16

Бренд: Cambridge SoundWorks Страницы: 20

Бренд: HAI Страницы: 2

Бренд: JBL Страницы: 28

Бренд: JBL Страницы: 16

Authentics L 16

Бренд: JBL Страницы: 17

Бренд: GATmatic Страницы: 16

Бренд: Idis Страницы: 20

Бренд: Inovonics Страницы: 4

Бренд: EverFocus Страницы: 2

Бренд: Northern Страницы: 2

Бренд: Memorex Страницы: 2

Бренд: Wheelock Страницы: 10

Бренд: Gallagher Страницы: 67

Бренд: Speco Страницы: 40

MEMCO Elite 618

Бренд: Halma Страницы: 4

Бренд: RadonAway Страницы: 22

SUCCESS ATP-434N

Бренд: TECHNO-AC Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды