Ono Sokki CF-4700, Руководство пользователя, Страница: 57 / 64

55
Specifications
CF-4700 FFT Comparator
Shape mode (option) General criterion Range specification
Level specification
Valid specification of judgment
shape
Specification from shape list
Averaging mode Comparison judgment of averaging results
Continuous/single mode Continuous mode Comparison judgment each time waveform analysis is performed
Single mode Judged each time the comparator switch is pressed
Output of judgment result General judgment output Judges the result as OK based on the NG criteria (output to NG
terminal)
Individual block/shape judgment
output Output of judgment results of up to five specified blocks/shapes
Output timing Selection whether to output after the end of measurement or after
each analysis
Automatic data saving Automatic saving only in the case of NG or all measurement results can be saved
Block or shape
specification method
Specifying an area by dragging on the screen
Specifying an area by a numeric value
Specifying an area by the cursor
Timer function Specification of start delay time 0 to 255 seconds in increments of seconds
Specification of judgment
execution time
0 to 255 seconds in increments of seconds
Judgment time Time till judgment output after
the end of FFT (averaging) 300 ms or less
„
Memory function
Recorder Main storage, USB flash memory or SD card
Data file Max. 9990 data (999 data × 10 blocks for the comparator and the external control, respectively)
DAT, TXT, BMP, TRC
• Analysis data can be recorded in three formats simultaneously.
• Files in .txt, .bmp, and .trc are selectable.
Panel condition memory Measurement conditions recording and calling (max. 50 items)