Ono Sokki CF-4700, Руководство пользователя, Страница: 37 / 64

35
Basic Operation of Hardware
CF-4700 FFT Comparator
4. Basic Operation of Hardware
4.1 Connection to USB Connectors (Type A)
The front panel of the CF-4700 FFT comparator has two type-A USB (universal serial bus) interface connector ports that
comply with the USB2.0 standards.
The USB flash memory and wireless LAN module can be connected to the type A USB connectors. This section describes
how to connect the USB flash memory to the connector as an example.
!
CAUTION
• Note that the USB flash memory may not function normally if a USB hub is used.
„
Installing and removing the USB flash memory
The USB flash memory can be installed on the type A USB port of the CF-4700 FFT comparator.
The USB flash memory thus installed can be specified as the storage destination of measurement, analysis, and condition
data.
The data stored in the USB flash memory can also be read into the CF-4700 FFT comparator.
!
CAUTION
• Read the instruction manual supplied and the precautions provided and use the USB flash memory correctly.
Ono Sokki Co., Ltd. bears no responsibility and accepts no claim for any failure caused by incorrect usage.
• For information on our recommended USB flash memory that can be connected to the CF-4700 FFT comparator, please the
nearest Ono Sokki sales office or the distributor where you purchased the product.
Install or remove the USB flash memory as follows:
[1]
Install USB flash memory.
Insert the USB flash memory into the type A USB port located on the front panel of the CF-4700 FFT comparator.
USB flash memory