26
SETTING THE RAID MODE
Deleting the current partition prior to changing RAID modes is highly
recommended.
Due to the chipset of the eSATA/USB 2.0 model, after deleting the current
partition and setting the new RAID mode, the reset button on the right side of the
Mode switch must be pressed in order for the updated RAID mode to take effect.
Pressing the reset button for at least 3 ~ 5 seconds is highly recommended.
1.
Use a small, flat-blade screwdriver to select the RAID mode.
2. Press the reset button.
2
1
eSATA/USB 2.0 RAID Modes:
JBOD Span Stripe Mirror
Changing the RAID Mode deletes all data stored on the device. If you have
saved data in the drives, backup all data before changing the RAID Mode.
