Version 02
Introduction
Thank you for your purchase of the 2.5” SATA to eSATA/USB 2.0/FireWire (800)
Hard Disk Drive (HDD) Enclosure. Your 2.5” SATA HDD Enclosure offers fast
and reliable data transfer. The groundbreaking DuoLink 2-in-1 eSATA/USB
connector combines eSATA and USB 2.0 connectivity in a single port.
Proper installation, care and use, as described in the User’s Manual will ensure
trouble-free use and prolong the life of your 2.5” SATA HDD Enclosure.
Important Reminders for all Enclosures
•
The main circuit board of the HDD enclosure is susceptible to static
electricity. Proper grounding is required to prevent electrical damage to
the enclosure or other connected devices, including the computer host.
Always place the HDD enclosure on a smooth, flat surface and avoid all
dramatic movement, vibration and percussion.
•
Do NOT allow water to enter the HDD enclosure.
•
Avoid placing the HDD enclosure close to magnetic devices (such as a
mobile phone), high-voltage devices (such as a hair dryer), or near a heat
source (such as on the dashboard of a car or any place where the
enclosure will be subject to direct sunlight).
•
The operating system may NOT detect the HDD enclosure if it does not
support the interface of your HDD enclosure. If so, installation of an
appropriate driver on the host computer is required.
•
Ensure that only a 9.5mm high 2.5” HDD is used in the enclosure. The
Enclosure will not function if an older model HDD with a different thickness
is used. Additionally the enclosure and other equipment may be
damaged.
Please thoroughly read and follow the instructions provided in this
manual. Failure to do so may result in damage to the enclosure and
any or all of the connected devices.
