Step 9:
You may need loosen the screws @) to tilt TV at your desired angle, please
remember to fasten the screws @ tightly after adjustment.
(Figure 10)
Step 10:
Manage TV cables orderly and guide them through the velcros. (Figure 11)
Figure
10
Figure 11
PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TWO TV BRACKETS TO THE
BACK PANEL OF TV IN STEP 2. MAKE SURE THE APPROPRIATE MOUNT HARDWARE
IS BEING USED PROPERLY.
1.
Select correct mounting hardware according to the screw hole size of your
TV, discard any remaining screws or spacers.
2.
Carefully lay your TV on its face on a non-abrasive surface, making sure to
lay padding underneath it so as not to damage the screen.
3.
Place left TV bracket and right bracket in the appropriate position, making
sure CENTERED on the back of the TV and
LEVEL with another.
4.
This product can only be installed on the perpendicular wall, do not install
the same on the ceiling.