UU
‘on arms (B&C) as picture shows, align the extension arm
mble extensi
II plate unit, then fasten them with screws (0) using allen
holes with the wa
key
(Figure 5)
Step
Step
5: Attach end supports (G) onto extension arms using screwdriver and screws
(Figure 6)
Figure
6
Step 6: Attach plastic covers (EGF) onto wall plate. (Figure 7)
@
=
Step
7:
Hang the pre-assembled TV unit onto extension arms. Fasten the tube
clips with brackets by using screw (M) with a screwdriver. (Figure 8)
A CAUTION: This step must require 2 or more people to finish.
Figure 8
Step
8:
Make sure the TV unit is horizontal, you can level the TV plate +4/-4
degrees by loosening 4 leveling screws with allen key
When it is at
your desired position, tighten the 4 leveling screws. (Figure 9)