Only OTC-FM2Z-LCD, Руководство пользователя

Страница: 8 / 10

ENANCER Electrónica S.A.
Page 8 of 10
Rua Max Grundig 9
4705-820 Braga Portugal info@only-smartbuildings.com
Tel: +351 253 221 484 www.only-smartbuildings.com
In case the unit is still switched off, the command On/Up switches on the unit and
increases the volume until the last selected level for this zone.
When the zone is switched on, the command On/Up increases the volume by one
point.
In turn, the command Off/Down decreases the volume continually until switching off
if it is not interrupted before by pressing again Off/Down or On/Up.
To associate a button to the volume of zone 1 proceed as follows:
- Verify that the button you wish to use sends the command On/Up or Off/Down, in
accordance with the function you desire.;
-
Press PROG on the unit repeatedly until “P VOL 1” appears on the display;
- Now press the button: a confirmation beep is heard on the unit and the
programming is finished.
Programming VOL 2
Programming VOL 2 allows to associate buttons to the volume control of zone 2
The command On/Up increases the volume, the command Off/Down decreases the
volume.
In case the unit is still switched off, the command On/Up switches on the unit and
increases the volume until the last selected level for this zone.
When the zone is switched on, the command On/Up increases the volume by one
point.
In turn, the command Off/Down decreases the volume continually until switching off
if it is not interrupted before by pressing again Off/Down or On/Up.
To associate a button to the volume of zone 2 proceed as follows:
- Verify that the button you wish to use sends the command On/Up or Off/Down, in
accordance with the function you desire.;
- Press PROG on the un
it repeatedly until “P VOL 2” appears on the display;
- Now press the button: a confirmation beep is heard on the unit and the
programming is finished.
Programming SELECT
The programming SELECT allows to associate a button to command the input
selector of the unit.
To associate a button to this function, proceed as follows:
-
Press repeatedly PROG on the unit until “P SELECT” appears on the display;
- Press the button you wish to associate: a confirmation beep is heard on the unit
and the programming is finished.
Note that the command sent by the button for this function is indifferent.
CLOCK FUNCTION
The sound units have an incorporated clock with alarm function and timer.
Timer
The unit can be switched on for a period of 15, 30, 45 or 60 minutes. To switch on
the unit for a certain period, keep the key pressed for more than 1 second: on the
1234567
P SELECT
SELECT
 1234567
TIMER 15