ENANCER Electrónica S.A.
Page 5 of 10
Rua Max Grundig 9
4705-820 Braga Portugal [email protected]
Tel: +351 253 221 484 www.only-smartbuildings.com
Auxiliary input
The unit has a 3.5mm jack for stereo sound input in the middle of the bottom part of
the front panel.
This input overrules the tuner and it is therefore not necessary to select the
respective input.
To return to hearing the tuner, simply pull out the jack.
This input has a different sensitivity than the audio inputs of the connections on the
back of the unit. The source connected to this jack should therefore have a volume
control (for instance an MP3 player), and the volume of the source should be
adjusted to the same level as the tuner. In this way distortion as a result of a too
strong input signal is avoided.
At this input you should not connect a CD since its output level is superior to the one
permitted at this input.
Audio inputs
The sound unit has 2 stereo inputs at the connections on the back. The installer
makes the connection of these inputs on a wall panel with 3.5mm jack or RCA
sockets.
The sound source (e.g. CD, MP3 or TV) can be connected permanently to these
inputs.
- To select the input 1, press repeatedly until AUDIO 1 appears on the display.
- To select the input 2, press repeatedly until AUDIO 2 appears on the display.
Input 1 and 2 can have sources with different level. For instance, a CD or HiFi
system have a line output that is superior to the one of a TV or TV receiver.
Therefore, it is necessary to adjust the input level so that the volume between the
different sources is balanced and that the impact of Loudness is correct.
It is possible to select 2 input levels: CD IN and MP3 IN (the same level as a TV).
To select the input level press . CD IN or MP3 IN appears on the display:
- select the type of the desired source with the keys and ;
- the selection is automatically memorized for the selected input.
Sound adjustment
The sound unit can adjust the sound for better adaptation to the room, to the
performance of the speakers and to the taste of the user.
The sound adjustment is assumed for all inputs and also for both sound zones
(outputs).
Bass
The bass balance is important for a nice sound. To increase the bass, press :
- the display indicates BASS 0.
To increase the bass tones, press . To decrease press .
The display indicates the value. The bass tones can be regulated from -14 until +14
dB in 2dB steps.
1234567
P1 103.00
1234567
AUDIO 1
1234567
MP3
IN
1234567
BASS +2
Содержание OTC-FM2Z-LCD
Страница 1: ...Audio User Manual ...
