background image

 

ENANCER Electrónica S.A.

 

 

Page 5 of 13

 

Rua Max Grundig 9 

 

 

 

4705-820 Braga Portugal                                                                                                                                             [email protected]                                                                                                                                                                                                            
Tel: +351 253 221 484                                                                                                                                                 www.only-smartbuildings.com 

4 = Thursday 
5 = Friday 
6 = Saturday 
7 = Sunday 

Press   to exit the menu. 
 
 
 

2.

 

Setting the cycle 

 
The  cycle  defines  the  operation  of  the  unit.  In  summer  mode,  the  climatization  is 
turned  on  if  the  room  temperature  is  higher  than  the  target  temperature,  while  in 
winter  it  is  turned  on  when  the  room  temperature  is  lower  than  the  target 
temperature.  
To  define  the  cycle  press    within  the  option  2-CYCLE.  Select  the  desired  mode 
with   and  . Then press   to validate.  
Press   to leave the menu. 
 
 
 

3.

 

Winter programme 

 

The winter programme defines the operating hours of the climatization and its 
respective target temperatures. 
It is possible to define, for each day of the week, 3 operating periods. You can, for 
the same day of the week, define overlapping periods, where the higher temperature 
prevails. 
The starting time of a period has to be before the end time. 

 

 

 

 
 

 
 
 

Period 1 does not have to start before period 2 or 3.  
To adjust the winter programme press   within the option 3-WINTER. 
The option LOCAL allows you to define the programme on the local unit. If there are 
OTC-TERMO

’s

 installed you can choose here which unit you wish to programme 

using the   and   keys, and validating with the   key. 
You can now select the day of the week you wish to edit with the   and   keys. 
Going to the right, you can select all days of the week, only Monday to Friday or only 
the Weekend. In this case of multiple days of the week you cannot edit the 
programme that was already defined for one particular day, always starting the same 
programme pattern.  
If you select a single day of the week and validate with  you will see the 1st 
programme of this day on the display. The bar below the 1 blinks indicating the 
programme number.  

   1234567 

2-CYCLE    

   1234567 

WINTER    

   1234567 

SUMMER    

   1234567 

2-CYCLE    

  0                 6                12              18               24 

P

P

P

   1234567 

3-WINTER    

   1234567 

LOCAL    

   1234567 

DAYS   

   1234567 

_ _-_ _-_ _º   

   

Содержание Climatization














Отзывы: