Cat M1 / NB-IoT Modem
NWK030
Technical Functions
•
In the Device Manager, find out which virtual COM the modem is attached to
»
Open the ‘Modems’ category flyout,
»
Right click the Qualcomm modem entry
»
Select properties.
• The port number [n] is listed at the top of main page.
• Open PuTTY
»
Select the Serial radio button in the main window.
»
In the <<connection>> box, replace COM1 with the COM[n] from the modem properties.
»
Set the baud rate to 9600
»
Click Open.
• Make the modem “echo” back the commandes.
»
In the terminal window, type
•
ATE1
and press Enter. It is possible that no text will be displayed until the command is executed.
Connecting to Modem via Minicom (Ubuntu)
• From the Ubuntu terminal:
•
sudo minicom -s
• Serial port setup
»
Press a - change name to ‘/dev/ttyUSB1’
»
Press g to change software flow control to YES
»
Exit (this will drop you to a new shell)
• Make the modem “echo” back the commandes. In the terminal window, type
•
ATE1
• You can now send any AT commands necessary
Connecting to Modem via PuTTY (Windows)
US Office
Phone: +1 802 861 2300
Email: [email protected]
www.onlogic.com
EU Office
Phone: +31 088 5200 700
Email: [email protected]
www.onlogic.com
12
