Cat M1 / NB-IoT Modem
NWK030
Important Notices and Warnings (cont.)
Device
Technology
Bands
Uplink Frequencies (MHz)
Downlink Frequencies (MHz)
Maximum Antenna gain (dBi)
NWK030
LTE
2
1850 - 1910
1930 - 1990
7
4
1710 - 1755
2110 - 2155
6.75
5
824 - 849
869 - 894
4.41
12
698 - 716
728 - 746
3.66
13
777 - 787
746 - 756
3.94
Introduction
The NWK030 is based on the SARA-R410M module and provides a single RF interface for connecting the external antenna.
“Cellular” represents the primary RF input/output for transmission and reception of LTE RF signals. The “Cellular” pin of NWK030 has a
nominal characteristic impedance of 50 Ω and must be connected to the primary Tx / Rx antenna through a 50 Ω transmission line to
allow proper RF transmission and reception.
When installed in a OnLogic computer, the “Cellular” interface is connected to an external antenna mount. The external mount uses an
SMA (female) connector. Our line of compatible cellular antennas all use a standard SMA (male) connector.
US Office
Phone: +1 802 861 2300
Email: [email protected]
www.onlogic.com
EU Office
Phone: +31 088 5200 700
Email: [email protected]
www.onlogic.com
4
