background image

ONLINE ELECTRONICS LTD 

600_5001_A01 

Page 12 of 12 

7.

 

DISPOSAL OF UNIT 

 
Online Electronics Ltd takes its responsibilities under the WEEE Regulations extremely seriously 
and  has  taken  steps  to  be  compliant in line  with  our  corporate  and  social  responsibilities.  In 
the  UK,  OEL  has  joined  a  registered  compliance  scheme  WeeeCare  (registration  number 
WEE/MP3538PZ/SCH). 
 
Electrical and electronic equipment should never be disposed of with general waste but must 
be separately collected for the proper treatment and recovery. 
 
The  crossed  out  bin  symbol,  placed  on  the  product,  reminds  you  of  the  need  to  dispose  it 
correctly at the end of its life. 
 
When  buying  a new  product  you  will have  the  opportunity  to  return,  free  of  charge,  another 
end  of  life  product  of  equivalent  type  that  has  fulfilled  the  same  functions  as  the  supplied 
equipment.  These items may be deposited at: Online Electronics Ltd, Online House, Blackburn 
Business Park, Woodburn Road, Aberdeen, AB21 0PS, UK. 
 
Alternatively, to arrange a collection of any waste electrical equipment, obligated to OEL please 
telephone WeeeCare on 0844 800 2004. 

Содержание 600 Series













Отзывы: