Onkyo X3, Руководство пользователя

Страница: 7 / 16

5 EN
3 Get started
Always follow the instructions in this
chapter in sequence.
Power supply
Either AC power or battery can be used as
power supply of this product.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the
back or underside of the speaker.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket.
Never pull the cord.
• Connect the power adaptor to:
• the
DC IN
socket at the back of the
speaker.
• the wall outlet.
Option 2: Battery power
The speaker can also be powered by the
built-in rechargeable battery.
Note
•
Rechargeable battery has a limited number of
charge cycles. The battery life and number of
charge cycles vary by use and settings.
•
It takes you approximately three hours to fully
charge the battery.
To charge the built-in battery:
• Connect to AC power supply.
System
status Battery status Power LED
status
On/off Low power (less
than 10%) Flashing red
On Under charging Flashing
white
On Fully charged Solid white
Switch on or go to standby
mode
• Press to switch the speaker on.
» If the speaker is fully charged, the
power indicator turns solid white.
»
If the speaker is being charged, the
power indicator flashes white.
» If the speaker is in low battery (with
less than 10% power), the power
indicator flashes red.
• To enter standby mode, press briefly.
»
The power indicator is dimmed in
white.
• To switch off when the speaker is on or
in standby mode, press and hold for
two seconds.
»
The power indicator turns off.