Onkyo TX-RZ810 Скачать руководство пользователя страница 29

Страница: 29 / 105

> Before start > Hookup > Setup > Playback

> Part Names

> Advanced Manual

Troubleshooting | Appendix

Rear Panel

1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV

component digital audio signals with a digital optical
cable or digital coaxial cable.

2. TUNER AM/FM 75Ω terminal: The supplied antennas

are connected.

3. VIDEO IN jacks: Input the video signals from AV

components with an analog video cable.

4. USB port: A USB storage device is connected so that

music files stored in it can be played. You can also
supply power (maximum 5V/1A) to USB devices with a
USB cable.

5. ETHERNET port: Connect to the network with an

Ethernet cable.

6. COMPONENT VIDEO IN jacks: Input the video signals

from AV components with a component video cable.

7. HDMI OUT jacks: Transmit video signals and audio

signals with a HDMI cable connected to a monitor such
as a TV or projector.

8. HDMI IN jacks: Transmit video signals and audio signals

with a HDMI cable connected to an AV component.

9. Wireless antenna: Used for Wi-Fi connection or when

using a BLUETOOTH enabled device. Adjust their
angles according to the connection status.

10.RS232 port: For connection to the home control system.
11. AC INLET: The supplied power cord is connected.
12.GND terminal: The ground wire of the turntable is connected.
13.AUDIO IN jacks: Input TV or AV component audio

signals with an analog audio cable.

14.SPEAKERS terminals: Connect speakers with speaker

cables. You can connect the multichannel speakers for the

main room and the speakers for a separate room (ZONE 2).
(North American models are compatible with banana plugs.)

15.ZONE 3 PRE/LINE OUT jacks: Output audio signals with

an analog audio cable to a pre-main amplifier or power
amplifier in a separate room (ZONE 3). (



P17)

16.ZONE 2 PRE/LINE OUT jacks: Output audio signals with

an analog audio cable to a pre-main amplifier or power
amplifier in a separate room (ZONE 2). (



P17)

17.SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a

subwoofer cable. Up to two powered subwoofers can be connected. The
same signal is output from each of the SUBWOOFER PRE OUT jacks.

18.PRE OUT jacks: Connect a power amplifier.
19.12V TRIGGER OUT jack: Allows you to connect a device with 12V trigger

input jack to enable link operation between the device and the unit.

20.IR IN port: Allows you to connect a multiroom remote control kit.

2 3

180°

90°

Содержание TX-RZ810










































































































Результаты поиска

Содержание TX-RZ810

Отзывы:

Похожие инструкции для TX-RZ810

Бренды по названию

Популярные бренды

Onkyo TX-RZ810, Руководство пользователя

Результаты поиска

Содержание TX-RZ810

Отзывы:

Похожие инструкции для TX-RZ810

Бренды по названию

Популярные бренды