TX-NR901
SERVICE PROCEDURES 2
This section explains ho w to specify the AM frequenc y
step. (This setting is not available on American and Aus-
tralian models.)
Note:
* This procedure can also be performed by using the
TX-NR901's [SETUP] button, [
]/[
]/[
]/[
]
buttons, and [ENTER] button.
Specifying the AM Frequency Step
(Worldwide model only)
1
Press the scroll wheel, and then
press the [SETUP] button.
The main menu appears onscreen.
2
Use the Up/Down [
]/[
] but-
tons to select "0. Hardware
Setup," and then press the
[ENTER] button.
The Hardware Setup menu appears.
3
Use the Up/Down [
]/[
] but-
tons to select "5. AM Frequency
Step," and then press the
[ENTER] button.
The AM Frequenc y Step menu appears.
4
Use the Up/Down [
]/[
] but-
tons to select "a. Frequency
Step," and then use the Left/Right
[
]/[
] buttons to select:
10 kHz: Select if 10 kHz steps are
used in your area.
9 kHz: Select if 9 kHz steps are used
in your area.
5
Press the [SETUP] button.
The setup menu closes.
ENTER
ENTER
ENTER
ENTER
0-5.AM Frequency Step
a.Frequency Step
:9 kHz
Quit:[SETUP]
ENTER
