TX-NR901
REMOTE CONTROLLER
26
23
22
25
24
27
16
19
21
17
18
20
TEST TONE, CH SEL, LEVEL– & LEVEL+
buttons
These buttons are used to adjust the level of each
speaker individually. These functions can be set
only with the remote controller. The [LEVEL–] and
[LEVEL+] buttons are also used to adjust the vol-
ume in Zone 2.
AUDIO SEL button
This button is used to select the audio input signal
format: analog, digital, or multichannel.
LIGHT button
This button is used to turn on or of f the remote con-
troller’s illuminated buttons.
DIRECT TUNING button
This button is used with the number buttons to
select a radio station by entering its frequenc y. Press
this button first, and then use the number buttons to
enter the frequenc y.
Display
The top line of this LCD display shows the name of
the currently selected input source. The bottom line
shows the currently selected remote controller
mode.
ZONE 2 button
This button is used when you want to set the v olume
and input source for Zone 2.
INPUT button
This b utton is used to select the input source. Press
this button first, and then roll the scroll wheel until
the name of the input source appears on the display
.
SLEEP button
This button is used to set the Sleep function. This
function can be set only with the remote controller .
VOL button
This button is used to set the volume of the
TX-NR901.
SETUP/GUIDE button
This button is used to access the onscreen setup
menus (OSD) that appear on the TV .
MUTING button
This button is used to mute the TX-NR901. This
function can be set only with the remote controller .
All ST button
This button is used to select the All Ch Stereo listen-
ing mode.
STEREO button
This button is used to select the Stereo listening
mode.
[
DSP] & [DSP
] buttons
These buttons are used to select the DSP (digital
signal processor) listening modes.
Re-EQ button
This button is used to turn on and of f the Re-EQ
function.
L NIGHT button
This button is used to set the Late Night function.
Net-Tune mode is used with the Net-Tune functions.
To
select Net-Tune mode, press the [MODE] button, and
then roll the scr oll wheel until “NET -T” appears on
the display .
Note:
While neither the [INPUT] button nor [MODE] button is
illuminated, the scroll wheel changes the input source
and remote controller mode simultaneously. (e.g., set the
input source to “MSR V/IRD” and the mode to
“NET-T.” )
Number/letter buttons
These buttons are used to enter numbers and letters
when searching for music in your Net-Tune Central
music library.
MODE button
This button is used with the scroll wheel to select
the remote controller modes. Press this button first,
and then roll the scroll wheel until “NET -T”
appears on the display
.
Up/Down/Left/Right [
]/[
]/[
]/[
] &
ENTER buttons
These buttons are used to na vigate Internet radio
and Net-T une server menus. The ENTER button is
used to confirm items and to start playback of Net-
Tune serv er tracks.
CH/DISC button
This b utton is used to select Internet radio presets.
Play [
] button
This button is used to start playback of Net-Tune
server tracks.
Previous/Next [
]/[
] buttons
The Previous [
] button is used to select the pre-
vious track. During playback it selects the begin-
ning of the current track. The Next [
] button is
used to select the ne xt track.
Pause [ ] button
This button is used to pause playback.
REPEAT button
This button is used for repeat playback.
ALBUM button
This b utton is used to search your Net-Tune Central
music library by album.
PLAYLIST button
This button is used to search your Net-Tune Central
library by playlist.
Net-Tune Mode
28
29
30
31
2
3
4
5
1
9
8
10
6
7
