TX-NR900/E
SPECIFICATIONS
AMPLIFIER SECTION
Continuous average power output (FTC)
All channels:
110 W per channel min. RMS at 8
, 2 channels driven from 20 Hz to
20 kHz with no more than 0.08%
total harmonic distortion.
145 W min. RMS at 6
, 2 channels
driven from 1 kHz with no more
t h a n 0 . 1 % t o t a l h a r m o n i c
distortion.
Continuous power output (DIN) 150 W at 6
Maximum power output (EIAJ)
180 W at 6
Dynamic power output (stereo)
2 280 W at 3
2 220 W at 4
2 140 W at 8
Total Harmonic Distortion:
0.08% at rated power
0.08% at 1 W output
IM Distortion:
0.08% at rated power
0.08% at 1 W output
Damping factor:
60 at 8
Input sensitivity and impedance
PHONO:
2.5 mV, 50 k
LINE (CD, TAPE, DVD,
VIDEO 1-5):
200 mV, 50 k
MULTICHANNEL INPUT
(FRONT L/C/R, SURROUND
L/R, SURROUND BACK L/R): 200 mV, 50 k
(SUBWOOFER):
36 mV, 50 k
COAXIAL 1, 2, 3 (DIGITAL):
0.5 Vp-p, 75
DVD, VIDEO 1, 2, 3, 4, 5:
1 Vp-p, 75
1 Vp-p, 75
(Y)
0.28 Vp-p, 75
(C)
COMPONENT VIDEO 1, 2:
1 Vp-p, 75
(Y)
0.7 Vp-p, 75
(P
B
, P
R
)
Output level and impedance
Rec out (TAPE, VIDEO 1, 2):
200 mV, 470
Pre out:
1 V, 470
ZONE 2 OUT:
100 mV, 470
VIDEO (VIDEO 1, 2, MONITOR
OUT, ZONE 2 OUT):
1 Vp-p, 75
S-VIDEO (VIDEO 1, 2,
MONITOR OUT):
1 Vp-p, 75
(Y)
0.28 p-p, 75
(C)
COMPONENT VIDEO OUT:
1 Vp-p, 75
(Y)
0.7 Vp-p, 75
(P
B
, P
R
)
Phono overload:
120 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency response:
10 Hz to 100 kHz : +1/– 3 dB
(CD in Direct mode)
RIAA deviation:
20 Hz to 20 kHz : ±0.8 dB
Tone Control
Bass:
±10 dB at 50 Hz
Treble:
±10 dB at 20,000 Hz
Signal-to-noise ratio (direct)
Phono:
80 dB (IHF A, 5 mV input)
CD/Tape:
110 dB (IHF A, 0.5 V input)
TUNER SECTION
FM
Tuning range
USA & Canadian models:
87.50 –108.00 MHz (100-kHz steps)
Other models:
87.50 –108.00 MHz (50-kHz steps)
Usable sensitivity
Mono:
11.2 dBf, 1.0 µV (75
IHF)
0.9 µV (75
DIN)
Stereo:
17.2 dBf, 2.0 µV (75
IHF)
23 µV (75 DIN)
50 dB quieting sensitivity
Mono:
17.2 dBf, 2.0 µV (75
)
Stereo:
37.2 dBf, 20 µV (75
)
Capture ratio:
2.0 dB
Image rejection ratio:
85 dB
IF rejection ratio:
90 dB
Signal-to-noise ratio
Mono:
76 dB
Stereo:
70 dB
Alternate channel attenuation:
55 dB
Selectivity:
50 dB (DIN)
AM suppression ratio:
50 dB
Total harmonic distortion
Mono:
0.2%
Stereo:
0.3%
Frequency response:
30 Hz–15 kHz, ±1.0 dB
Stereo separation:
45 dB at 1 kHz
30 dB at 100 Hz – 10 kHz
AM
Tuning range
USA & Canadian models:
530 to 1,710kHz (10kHz steps)
Other than world wide models:522 to 1,611 kHz (9-kHz steps)
Worldwide models:
522 to 1,611 kHz (9-kHz steps) or
530 to 1,710 kHz (10-kHz steps)
Usable sensitivity:
30 µV
Image rejection ratio:
40 dB
IF rejection ratio:
40 dB
Signal-to-noise ratio:
40 dB
Total harmonic distortion:
0.7%
GENERAL
Power supply
USA & Canadian models:
AC 120 V, 60 Hz
European & Australian models:AC 230 –240 V, 50 Hz
Some Asian models:
AC 220–230 V, 50/60 Hz
Worldwide models:
AC 220– 230 and 120 V switchable,
50/60 Hz
Power consumption
USA & Canadian models:
8.4 A
Other models:
670 W
Dimensions (W
H D):
435 175 459 mm
17-1/8" 6-7/8" 18-1/16"
Weight
USA & Canadian models:
17.5 kg (38.6 lbs)
Other models:
18.2 kg (40.1 lbs)
Specifications and features are subject to change without notice.
