22
Initial Setup with Auto Start-up Wizard
Initial Setup Starts Automatically
When you turn the unit on for the first time after purchasing
it, Initial Setup is automatically shown on the TV to enable
you to make settings required for startup using simple
operations following onscreen guidance.
1. Switch the input on the TV to that assigned to the unit.
2. Put batteries into the remote controller of this unit.
3. Press
Í
on the remote controller to turn the unit on.
4. Select the item with the cursors of the remote controller
and press ENTER (a) to confirm your selection. To return
to the previous screen, press
(b).
0
If you terminate the procedure on the way or want to
change a setting made during Initial Setup, press
on
the remote controller, select "7. Miscellaneous" – "Initial
Setup", and press ENTER.
∫
1. AccuEQ Room Calibration
Place the supplied speaker setup microphone in the
listening position, measure the test tones emitted by the
speakers, then the unit automatically sets the optimum
volume level for each speaker, the crossover frequencies,
and the distance from the listening position. This also
automatically adjusts the equalizers for the speakers and
enables correction of distortion caused by the acoustic
environment of the room.
0
Calibration takes between 3 and 12 minutes to be completed.
> Before Start
> Part Names
> Install
> Initial Setup
> Playback
1
2
3
TV
INPUT
a
b
SN29402759_TX-NR575_BAS_En_1702XX.book 22 ページ 2017年2月21日 火曜日 午後9時3分
Содержание TX-NR575
Страница 32: ...32 SN29402759_TX NR575_BAS_En_1702XX book 32...
Страница 64: ...32 SN29402759_TX NR575_BAS_Fr_1702XX book 32...