Onkyo DX-C390, Инструкция по эксплуатации

Страница: 13 / 28

13
Connecting the DX-C390
—Continued
With (Remote Interactive) you can control the
DX-C390 together with your other -compatible
Onkyo AV components. With some Onkyo AV receivers
you can use one remote controller to control all your
Onkyo components and use the following special
functions:
■
Auto Power On
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you turn on the DX-C390, the
AV receiver will turn on and select the DX-C390 as the
input source.
■
Direct Change
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you start playback on the
DX-C390, the AV receiver will select the DX-C390 as
the input source.
■
Auto Power Off
When you set an -compatible Onkyo AV receiver to
Standby, all other AV components connected via
enter Standby as well.
■
Dimmer
When you dim the display brightness on an -compat-
ible Onkyo AV component, the displays on all other AV
components connected via
are dimmed as well.
To use the functions, you need to connect one of the
DX-C390’s connectors to an connector on
another AV component in your system by using the sup-
plied
cable.
See the manuals supplied with your other -compati-
ble AV components for more information.
Notes:
• Use only cables for connections.
•
To use you must make an analog RCA/phono
connection between your DX-C390 and Onkyo AV
receiver even if they are connected digitally.
• The DX-C390 has two connectors. You can con-
nect either one to your Onkyo AV receiver. The other
connector is for connecting additional
-compatible
components.
• Connect the DX-C390’s connector to only Onkyo
AV components. Connecting to other manufacturer’s
AV components may cause them to malfunction.
• Some Onkyo -compatible AV components may
not support the special functions described here.
Connections
RCA/phono audio connecting cable
cable
Hi-fi amp, AV receiver
CD
R L
To use you must make an analog audio connection (RCA/phono)
between the DX-C390 and your other Onkyo equipment even if they are
connected digitally.
Disconnect the power
cord before making any
connections!
Coaxial IN
Coaxial cable (not supplied)
DX-C390̲En.book Page 13 Wednesday, August 27, 2003 5:49 PM