Onkyo CR-L5 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 32

Onkyo CR-L5 Скачать руководство пользователя страница 28

28

Timers—

Continued

You can turn timers on or off as necessary. This can be use-
ful when, for example, you’re on holiday and you don’t
want to be woken up by the timer that you normally use as
an early-morning radio alarm.

1

Press the [TIMER] button repeatedly
to select the timer that you want to
turn off.

In this example, timer #1 is selected.

2

Use the Up/Down [ ]/[ ] buttons to
select Timer Off.

The timer is turned off, and the previous display reap-
pears after two seconds.
To turn a timer back on again, repeat this procedure and
use the Up/Down [ ]/[ ] buttons to select Timer On.

You can check a timer’s settings as follows.

1

Press the [TIMER] button repeatedly
to select the timer that you want to
check.

In this example, timer #1 is selected.

2

Press the [ENTER] button repeatedly
to cycle through the timer’s settings.

Notes:

• You can edit the selected timer’s settings as you check

them. To do this, use the Up/Down [ ]/[ ] buttons to edit
the currently displayed setting, and then press [ENTER]
to move on to the next setting.

• If the selected timer was OFF, and you edit its settings, it

will be turned ON.

With the sleep timer you can set the CR-L5 so that it auto-
matically turns off after a specified period.

1

Press the [SLEEP] button repeatedly
to select the required sleep time.

With the [SLEEP] button you can set the sleep time
from 90 to 10 minutes in 10 minute steps.
While the sleep time is displayed, you can use the
remote controller’s Up/Down [ ]/[ ] buttons to set the
sleep time in 1 minute steps from 99 to 1.
The SLEEP indicator appears on the display when the
sleep timer has been set, as shown. The specified sleep
time appears on the display for about five seconds, then
the previous display reappears.

To cancel the sleep timer,

press the [SLEEP] button

repeatedly until the SLEEP indicator disappears.

To check the remaining sleep time,

press the

[SLEEP] button. Note that if you press the [SLEEP]
button while the sleep time is being displayed, you’ll
shorten the sleep time by 10 minutes.

Turning Timers Off

ON

STANDBY

ENTER

TONE

TIMER

DIRECT

SLEEP

VOLUME

UP

DOWN

CLOCK CALL

MUTING

1

2

▼

▲

3

4

5

6

7

8

9

▲

▼

INPUT

10/0

>10

ENTER

TIMER

SLEEP

Checking Timer Settings

Using the Sleep Timer

SLEEP indicator

CR-L5̲E.book Page 28 Monday, May 19, 2003 4:05 PM

«
...
26
27
28
29
30
...
»

Содержание CR-L5

































Отзывы:

Нет отзывов