12
Connecting -compatible
Components
With
(Remote Interactive) you can control your
-
compatible Onkyo cassette tape deck or CD recorder with
the CR-L5’s remote controller, and use the following spe-
cial
functions:
■
Auto Power On
When you turn on a component connected via
while the
CR-L5 is in Standby, the CR-L5 automatically turns on and
selects that component as the input source.
This function doesn’t work if the CR-L5 is already on.
■
Direct Change
When you press the play button on a component connected
via
, the CR-L5 automatically selects that component as
the input source.
■
Auto Power Off
When you set the CR-L5 to Standby, all components con-
nected via
also enter Standby.
■
Controlling Other Components
Other components can be controlled with the supplied
remote controller (see “Remote Controller” on page 10).
■
CD Synchro Recording
A CD recorder or cassette tape deck connected via
, and
set to record pause, will start recording automatically when
CD playback is started on the CR-L5.
■
Timer
The CR-L5’s timers can be used to automatically start play-
back or recording on a cassette tape deck or CD recorder
connected via
(see “Timers” on page 26).
■
Sleep Timer
When you set the CR-L5’s sleep timer, the sleep timers on
components connected via
are also set, so all compo-
nents switch off after the specified period.
To use
, you need to connect the CR-L5’s
connector
to an
connector on the other component by using an
cable. An
cable is supplied with each
-compat-
ible Onkyo cassette tape deck and CD recorder.
Hookup Example:
Notes:
• Push the plugs in all the way to make a good connection.
• Use only
cables for
connections.
• To use
you must make an analog RCA/phono con-
nection between the CR-L5 and the other component
even if they are connected digitally.
• If a component has two
connectors, you can connect
either one to the CR-L5. The other connector is for con-
necting additional
-compatible components.
• Connect the CR-L5’s
connector to only Onkyo com-
ponents. Connecting to other manufacturer’s components
may cause them to malfunction.
• Some Onkyo
-compatible components may not sup-
port the special functions described above.
CD RECEIVER
MODEL NO.
CR-L
5
R
L
R
L
N. / SPEAKER
N. / SPEAKER
SPEAKERS A
SPEAKERS B
REMOTE
CONTROL
PREOUT
R
L
R
L
TV/LINE
TAPE
CDR
FM 75
ANTENNA
COAXIAL
OPTICAL
AUDIO
ANALOG
OUT
OUT
SUB
WOOFER
IN
IN
IN
AUDIO
OUTPUT
DIGITAL
AM
CDR
OUT
IN
COAXIAL
OPTICAL
AUDIO
OUTPUT
DIGITAL
REMOTE
CONTROL
L
R
ANALOG
INPUT
L
R
ANALOG
OUTPUT
DIGITAL IN
OPTICAL
REMOTE
CONTROL
To use
you
must make an
analog RCA/
phono connec-
tion between
the CR-L5 and
the other com-
ponent even if
they are con-
nected digitally.
cable
Onkyo CD recorder
CR-L5̲E.book Page 12 Monday, May 19, 2003 4:05 PM