En-
32
Using the Timer
The CD receiver has a programmable timer for
automated playback, and a sleep timer for turning the
CD receiver off after a specified period.
You can also use the alarm playback function of your
iPod/iPhone to initiate timer playback on the CD
receiver.
The timer can be used to start FM/DAB, CD, iPod/USB,
or LINE playback at a specified time. You could, for
example, use a timer to turn on the CD receiver every
morning, just like a radio alarm clock.
Note:
• If iPod is selected as the input source for the timer
settings, USB will play if only a USB flash drive is
connected, and iPod/iPhone will play if an iPod/
iPhone is connected.
Notes:
• You must set the clock before you can program the
timer.
• If you don’t operate any buttons for 5 seconds while
programming a timer, the procedure will be cancelled
and the previous display will reappear.
• When the CD receiver is turned on by the timer,
playback will begin with the most recently received
station in the case of FM/DAB, the first song in the
case of a CD or iPod (USB), and the current state of
the connected device in the case of LINE.
• Only one timer can be set.
1
Prepare the source that you want the timer
to play.
If you want FM/DAB to play, tune to the station
you want to hear.
If you want a CD to play, insert the disc.
For an iPod/iPhone, place it in the dock. If you’re
using a USB flash drive rather than an iPod/iPhone,
disconnect the iPod/iPhone from the iPod dock
(see page 30).
If you want to play a device connected to LINE,
make settings on the connected device so that it
will start playing when the timer operates.
2
Press the [TIMER] button repeatedly until
“Timer XX” appears.
“XX” indicates the source that was last selected for
timer playback.
3
Use the arrow [
]/[
] buttons to select the
source, and then press [ENTER].
You can select the following sources:
CD, iPod (USB), FM/DAB, LINE.
In the display, “TIMER” and a number indication
will blink according to the input source you’ve
selected.
The number will be “1” for FM/DAB, “2” for CD,
“3” for iPod (USB), and “4” for LINE.
4
Use the arrow [
]/[
] buttons to specify the
“hour” at which you want the timer to play,
and then press [ENTER].
5
Use the arrow [
]/[
] buttons to specify the
“minute” at which you want to timer to play,
and then press [ENTER].
6
Use the arrow [
]/[
] buttons to select
“Timer On,” and then press the [ENTER]
button.
When a timer is turned on, its TIMER and number
appears on the display.
If there is no operation for several seconds, the
setting will be made with the currently-shown
content.
The display will return to its previous state except
for “TIMER” and the number of the selected input
source; the timer is now set.
7
Press the [
ON/STANDBY] button or the
remote controller’s [
] button to set the CD
receiver to Standby.
Programming the Timer
M
F
/
H
ENTER
TIMER
DISPLAY
Tim„„er„„ F„„M„„ „„
Tim„„er„„--„„:„„--„„
Tim„„er„„ 6„„:„„00„„