Onkyo CBX-500, Инструкция по эксплуатации

Страница: 36 / 60

En-
36
Listening to the Radio
—Continued
7. Sensitivity
Display the sensitivity of reception. Keep 100% for
good reception.
DAB Setup
Use the following functions and settings to set up DAB
digital radio.
1 Press the [MENU] button repeatedly until
the item to be set appears.
2 Press [ENTER].
The items are explained below.
■
Auto Scan?
This setting determines which DAB frequency range of
Band III is scanned by the Auto Scan function (see
page 34).
UK (default): Band III (11B–12D).
All Band 3 : Band III (5A–13F).
■
Tuning Aid?
With the Tuning Aid, you can adjust the position and
direction of the DAB antenna while monitoring the sig-
nal strength on the display. If the letter “B” appears on
the display, it means the signal strength is Bad. If the
letter “G” appears, it means the signal strength is Good.
To make the letter “G” appear, adjust the antenna to get
the best signal strength.
Use the Fast Reverse and Fast Forward [

]/[

]
buttons to select other multiplexes (Band III: 5A–13F).
■
St. Order?
With this setting, you can change the order of stations in
the station list.
Use the Fast Reverse and Fast Forward [

]/[

]
buttons to select the following options, and then press
[ENTER].
Alphabet (default):
Sort stations alphabetically.
Favorite : Sort stations by favorites. The stations
you select the most will appear at the
top of the list.
Active : Sort by active stations. Receivable sta-
tions appear at the top of the list. sta-
tions that cannot be received properly
appear at the bottom of the list.
Multiplex : Sort stations by multiplex.
Trim List : Delete all of the stations that cannot be
received properly from the list.
■
DRC Setting?
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels—ideal for listening to the radio late at
night when you don’t want to disturb anyone.
Use the Fast Reverse and Fast Forward [

]/[

]
buttons to select the following options, and then press
[ENTER].
DRC 0 (default):
DRC off.
DRC 1 : Large reduction in dynamic range.
DRC 1/2 : Small reduction in dynamic range.
MENU
ENTER
,
Multiplex Number G (Good) or B (Bad)