9
Befor
e Using
Connections
Other Information
Operations
Using the remote controller
The unit is not shipped with a remote controller.
However, you can use a remote controller (RC-
398S) that is shipped with the A-905X amplifier
or an optional remote controller (RC-289C).
Remote controller RC-398S
When the remote controller RC-398S supplied with
the amplifier A-905X is used, operate the remote
controller pointing towards the amplifier’s remote
sensor.
Be sure to make the
connection securely. If
the connection is incomplete, you cannot use the
remote controller to operate the unit.
Note
The DISC button on the RC-398S remote control-
ler cannot be used.
Remote controller RC-289C
When the optional remote controller RC-289C is
used, operate the remote controller pointing to-
wards the CD player’s remote sensor.
Remote control
sensor
Remote control
sensor
30
°
5m
30
°
C-705X
A-905X
RC-398S
30
°
5m
C-705X
30
°
RC-289C
Note
The DISC 1 to DISC 6 buttons and the NEXT SE-
LECTION button on the RC-289C remote control-
ler cannot be used.
Notes
• Place the unit away from strong light such as
direct sunlight or inverted fluorescent light which
can prevent proper operation of the remote
controller.
• Using another remote controller of the same
type in the same room or using the unit near
equipment which uses infrared rays may cause
operational interference.
• Do not put any object such as a book on the
remote controller. The buttons of the remote
controller may be pressed by mistake and drain
the batteries.
• Make sure the audio rack doors do not have
colored glass. Placing the unit behind such doors
may prevent proper remote controller operation.
• If there is any obstacle between the remote con-
troller and the remote control sensor, the re-
mote controller will not operate.
