In this connection scheme, we have a stereo setup, with a subwoofer, being fed
signal by a preamp/processor whereby the RS-1Ks woofers and the subwoofer are
controlled by a single R-DES.
Set the FL/FR speakers to 'SMALL' (the size settings of the other speakers is moot,
as this is a stereo system configuration).
Select a crossover point in the preamp's menu.
Connect the FL/FR amplifier's speaker wire connection to the respective RS-1K
PMA terminals.
From the preamp's SW output jack, connect a 'Y' jack which will feed both inputs of
R-DES which then controls the low frequencies to the RS-1K woofers and the
subwoofer.
Follow the same phase tweak procedure as outlined in illustration #1.
ILLUSTRATION #2
