background image

5

Onity OS700 RFID Safe User Manual

Step

Action

1. 

Open the OS700 safe door and locate the battery cover at 

the back of the door.

    

2. 

Using a Phillips screwdriver, unscrew the screws and remove 

the battery cover. 

3. 

Replace the batteries matching the correct polarity as shown 

in battery holder.

4. 

Replace the battery cover and secure with screws.

5. 

Dispose of spent batteries per local regulations.

5.3  Remove the Safe Door

CAUTION

!  Be sure to hold on to the door during removal to keep it from falling.  The door is very heavy.

Step

Action

1. 

Using a 13mm ratchet, remove the two (2) nuts at the 

hinged side of the door

2. 

After the two nuts are removed, partially close the door, and separate the hinge from the door. 

3. 

Slide the door completely out of the slot between the hinge and the safe body. 

5.4  Replace the Safe Door

To install the new door on all safes, reverse the steps used to remove it.  Verify the door swings closed and opened.  

When the door is properly aligned, replace the inside cover (if necessary) and secure it with the screws.  With the 

door open, present a valid RFID key card to make sure the bolts extend without obstruction from the inside cover.  

If the bolts do not extend properly, adjust the inside cover accordingly.

Содержание OS700









Отзывы: