5
4
REMOTE OVERVIEW
OPERATIONS
Special function
CLEAN AIR function(on some models)
Improving the quality of indoor air is one of the mission of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specific
configuration of the model). With the anions generated by Ionizer, the air circulation
of the air conditioner fills the room with refreshing, natural and healthy air. The Plasma
Dust Collector generates an high voltage ionization zone, through which the air is
converted to plasma. Inside the air most of the dust, smoke, and pollen particles are
captured by the electrostatic filter.
SELF CLEAN function
§
Function used after the Shut Down of cooling operation to clean the
Evaporator and keep it as fresh for the next operation.
§
The unit will operate as following sequence :
FAN ONLY mode at Low fan speed--Heating operation with LOW fan
speed(applicable to cooling& heating modles only) ---FAN ONLY operation--
Stop Operation---Turn off. This function is only available under COOL(AUTO
COOL, FORCED COOL) and
§
DRY mode.
Before select the function, it is recommended to run the air conditioner under
§
Cooling operation for about half an hour. Once the Self Clean function is
activated, all TIMER setting will be cancelled.
§
During Self Clean operation, when press the SELF CLEAN button on the
remote controller again will stop the operation and turn off the unit
automatically.
9)ON/OFF Button:
Push this button to start operation, push the button again to stop operation.
10)TIMER ON Button:
Press this button to initiate the auto-on time sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When the setting time displays 10, each press
will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed
program, simply adjust the auto-on time to 0.0.
11)SLEEP Button:
Press this button to go into the Energy-Saving operation mode. Press it again to cancel.
This function is only can be used on COOL, HEAT and AUTO mode and maintain
themost comfortable temperature for you.
12)TIMER OFF Button:
Press this button to initiate the auto-off time sequence. Each press will increase the auto-
timed setting in 30minutes increments. When the setting time displays 10, each press will
increase the auto-timed setting 60 minutes increments. To cancel the auto-timed
program, simply adjust the auto-off time to 0.0.
13)LOCK Button:
When you press the recessed LOCK button, all current settings are locked in and the
remote controller does not accept any operation except that of the LOCK. Press again to
cancel the LOCK mode.
14) TURBO Button:
Push this button to activate/cancel the Turbo function which enables the unit to reach the
preset temperature in the shortest time. On cooling mode, the unit will blow strong
cooling air with super high fan speed. On heating mode (applicable to the unit adopts
PTC only), the PTC will bring fast heating operation.
15) CLEAN AIR Button(on some models):
When push this button, the Ionizer or Plasma Dust Collector(depending on models) is
energized and will help to remove pollen and impurities from the air.
