6
Hazardous Pressure
Incorrectly installed or tested equipment may fail, causing
severe injury or property damage. Read and follow instructions
in owner’s manual when installing and operating equipment.
Have a trained pool professional perform all pressure tests.
All glued fi ttings and pipe work should be allowed to dry to
atmosphere for 24 hours before closing installation. Failure to
do so could cause injury or installation failure.
The fi lter owner and operator must be provided with this
owner’s manual by the installer. This must be read before
installation and followed during operation. Users not familiar
with pool equipment should seek advice from suitably
qualifi ed persons.
Installation
WARNING
Filter pumps require
hazardous voltage
which can shock, burn,
or cause death.
BEFORE WORKING ON
THE PUMP OR MOTOR:
Disconnect power to
motor.
Hazardous Pressure!
Can cause severe
injury or major property
damage from tank
explosion.
BEFORE WORKING ON
THE FILTER:
1. Stop Pump
2. Release all pressure from
system, by turning valve
handle to waste.
