OneTouch Ping, Краткое руководство пользователя

Страница: 18 / 32

Coding Your Meter-Remote
Code numbers are used to calibrate your meter-remote with your test strips. Every time
you open a new vial of test strips, you will need to match the code on your meter-remote
with the code on your test strip vial.
1. Insert a test strip into the meter-remote. When the Test/
Match Code screen appears, it will display the code number
from your last test.
Changing the Batteries
1.
Remove the battery compartment cover by pressing the tab to
the right and then lifting the cover.
2.
Lift both batteries out by pulling up on the ribbon.
3.
Take the plus (+) end of one battery and insert it underneath
the plastic tab at the plus (+) end of one of the battery
compartments. Then push down on the minus (-) end until the
battery clicks into place.
4. Repeat these steps with the second battery.
5. Replace the battery compartment cover by inserting the two
compartment tabs into the matching holes and then pushing
down on the cover until it clicks into place.
NOTE:
You must insert the plus (+) end of each battery before
the minus (-) end for the batteries to be installed correctly.
Plastic Tab
18
OneTouch
®
Ping
®
Meter-remote
Test
Match Code
25
II