OneTouch® Diabetes Management Software v2.3.1 User Manual
81
Table of Contents
|
Index
W
Previous Next
X
Table of Contents
|
Index
W
Previous Next
X
81
Clear Meter Readings
Once you transfer readings to the database, you can clear the readings from the meter
memory. All readings will be permanently erased from the meter. Clearing meter readings
follows a similar process to Download Meter Readings.
1. Connect the round stereo plug jack on the OneTouch
™
Interface Cable to the meter data
port. Firmly push the cable until it clicks into place. If your OneTouch
®
Meter uses an
adapter in place of a data port, first connect the round stereo plug jack to the adapter.
Then connect the other end of the adapter to the meter test strip port. OneTouch
®
Meters
that use adapters in place of data ports include:
■
OneTouch
®
Fast
Take
®
Meter
■
OneTouch
®
Scan
®
Meter
■
OneTouch
®
Euro
Flash
®
Meter
■
OneTouch
®
Smart
Scan
™
Meter
2. Connect the other end of the OneTouch
™
Interface Cable to one of the available COM
ports on your PC.
3. Make sure the COM port number matches the selection you made on the General Tab
of the Preferences screen. Or, select the
Autosearch
option on the General Tab. If the
Autosearch option is selected, OneTouch
®
DMS will try to locate the correct COM port
where you connected the meter.
4. Find the meter that you are connecting from the lists below and turn the meter ON or OFF
as noted. A visual of the meter types will appear on the OneTouch
®
DMS screen to help
guide you.