OPERATING THE BEAN CAN OPENER
1. Place your Can Opener on top of the can with its rim positioned in the groove
between the Cutter and the Drive Wheel. (fig.2)
NOTE: To open the cans with tab, turn them upside-down, so that
the Can Opener can work on the lid without tab.
2. With the can on a flat surface, press the Button at the left for about one
second and release. The Can Opener will start cutting the can (fig.3).
3. When the cutting has completed, press the Button immediately to reverse
the Cutter. (fig.4)
4. Make sure the Cutter resets to the start position and the motor stops. Then,
lift the Can Opener off the can. The Magnet on the Can Opener will pick up
the lid as well for convenience (fig.5).
NOTE: There is functional sharp edge on the round
Cutter which should be treated with care
Fig.2
Fig.4
Fig.3
Fig.5
Auto cutting,
press to stop
Press and hold
Start Button to start
Can rim in groove
lift can opener with lid
