AA
Button
Battery Door
Front Cap
Magnet
Drive Wheel
Cutter
GETTING STARTED
Slide back the bottom cover
BATTERY INSTALLATION
1. Slide back the battery door to remove and install 2 AA alkaline or rechargeable
batteries intothe battery compartment according to the polarity (+/-) instruction.
2. Replace the battery door after the batteries have been installed (fig.2).
3. Press the Button to reverse the Cutter whenever necessary.
4.Always replace all batteries at once and never mix old and new batteries or
batteries of different types.
5. Take out the batteries if the Can Opener is stored for a long time.
CAUTION: The Cutter may be still operating when replacing the
batteries. Always keep your fingers away from the Cutter.
Fig.1
