OneTech NT09-225C-H, Инструкция по эксплуатации

Страница: 4 / 12

NT09-7xx, -2xx, -5xx ENGLISH v.2.0
4
TYPES OF DUST EXTRACTION
TROUBLESHOOTING GUIDE
Not operating
Possible Cause Solution
Blades broken or worn out Replace blades
Ball bearing damaged Replace ball bearing
Rusty Motor or clogged with objects Disassemble and repair
Motor blades stuck Disassemble and repair
Regulator is set at « OFF » Adjust regulator
No air flow Check air system and connections
Valve set damaged or broken Disassemble and repair
Low efficiency
Possible Cause Solution
Not enough air pressure Check air pressure
Regulator is not set properly Adjust regulator
Motor running abnormal or unusual noises occur
Possible Cause Solution
Not enough lubrication Lubricate
Ball bearing, cylinder, rotor blade, shaft damaged Replace parts
Motor keeps running
Possible Cause Solution
Valve set has other objects stuck on it Remove foreign objects
Throttle valve or spring broken Disassemble and repair
Valve seat broken, damaged Disassemble and repair
Throttle valve broken Replace parts