Onespace Executive Desk with Hutch and USB, Charger Hub, Руководство по сборке

Страница: 8 / 16

8 of 16
ASSEMBLY INSTRUCTIONS
Fix eighteen Bolts (A) to the Boards shown below.
STEP 3
Insert twelve Large Cams (B1) into the Left (2) and Right (6) Boards. Make sure the arrows are pointing toward the holes where
the bolts go in.
Attach the Left Corner Boards, Front (1) and Back (3) to the Left Board (2) and one Trim Board (4) by inserting the
Bolts and turning the Cams clockwise half a turn to lock into place. At the same time, insert the dowels of the Trim Board (4)
into the holes of the Front and Back Boards.
Attach the Right Corner Boards, Front (5) and Back (7) to the Right Board (6) and the other Trim Board (4) in the same way.
STEP 4
30 Right
30 Left
2
1
3
5
6
7
5
6
7
4
30 Left
30 Right
A x 18
B1 x 12
1
2
3
4
4
PLACE PART 4 ON THE
OPPOSITE SIDE
CAUTION:
Do not overtighten
cams.
A
B1