Onespace Executive Desk with Hutch and USB, Charger Hub, Руководство по сборке

Страница: 14 / 16

14 of 16
ASSEMBLY INSTRUCTIONS
Insert one Small Cam (B2) into the
Drawer Right Board (19) and one
into the Drawer Left Board (18).
Making sure the grooves are aligned,
attach the Small Drawer Front (22) to
the Right and Left Boards by inserting
the Bolts and tightening the Cams.
STEP 15
Insert two Small Cams (B2) into the Large Drawer Right (27) and two into the
Large Drawer Left (26). Making sure the grooves are aligned, attach the
Large Drawer Front (25) to the Right and Left Boards by inserting the Bolts
and tightening the Cams.
Slide Drawer Bottom B (24) into the grooves. Align the groove in the
Large Drawer Back (28) with the Drawer Bottom and fasten it to the
Right (27) and Left (26) Boards using four Screws (E). At the same time,
insert the File Holders (32) into the holes at the top of the Front and
Back Boards.
STEP 16
22
18
19
23
24
22
22
19
18
F1
25
26
27
28
24
32
25
26
27
B2 x 4
G x 2
F1 x 2
B2 x 2
Attach a Large Handle (
I
) to the Drawer Front (22)
using two Screws (F1) with two Nuts (G).
F1
G
G
G x 2
F1 x 2
I
x 1
E x 4
E x 4
Slide Drawer Bottom B (24) into the
grooves. Align the groove in the
Small Drawer Back (23) with the Drawer
Bottom and fasten it to the Right (19)
and Left (18) Boards using four Screws (E).
Attach a Large Handle (
I
) to the
Drawer Front (22) using two
Screws (F1) with two Nuts (G).
I
x 1