4
Floor Stand:
For reference we have divided the floor stand into multiple
parts, namely GoSafe unit, Top Assembly, Vertical Assembly
and Stand Base.
Installing the Floor Stand:
Step 1:
Remove the pre-installed bolt
(marked
in
red)
from
the
OneScreen GoSafe Device. Pass the
bolt through all the cables to
remove it. Put it aside as we will
need to use this again when
securing the GoSafe Device.
Step 2:
Remove the 2 screws (marked in red) from the part
labelled A (Top assembly) and separate it from the part
labelled B (Vertical assembly).
Step 3:
Pass
the
cables
through the hole on
the top assembly.
Step 4:
Pass the cables through the bolt removed in step 1 and use
it to secure the OneScreen GoSafe and top assembly
together.
Step 5:
Connect the RJ45 (Ethernet) cable, power
connector and USB connector (White) to the
ports on the inside of the top assembly. The
Power and RJ45 connectors run to the bottom of
the floor stand.
Step 6:
Conceal all remaining cables
inside the floor stand and
secure the top assembly and
the vertical assembly using
the screws removed in step 2.
Step 7:
Remove the screws
from the bottom of
the vertical assembly
and align the vertical
assembly with the
floor stand’s base.
Step 8:
Use the screws to secure the
stand base with the vertical
assembly. Make sure the screws
are screwed on tight and the
vertical assembly stands firmly
on the base.
Содержание GoSafe
Страница 1: ...1 OneScreen GoSafe Quick Start Guide...
