8
Playing with the Rhythms of GEP 50
To turn on/off the electronic rhythm on your GEP 50, simply press down the
[Encoder2]. The latest rhythm utilized will be the one to be played.
To enter EDIT RHYTHM Mode in the GEP 50, make sure that PLAY Mode is
selected.
4
To adjust the number of beats per minute
(BPM), turn [Encoder1] . The values are in
between 40 and 299 BPM.
2
Use the Footswitches
[UP] and [DOWN] to select
one of the 60 different
rhythms available.
For more information on
GEP 50's rhythms, consult
page 17.
3
To adjust the volume of the
rhythms, turn [Encoder2].
1
Press down [Encoder2] to turn
on/off the electronic rhythm.
1
Press and hold [Encoder2] for
approximately 2 seconds.
5
To exit RHYTHM Mode, press down
[Encoder2] again for approximately 2
seconds.
TAP
SW EFF
BYPASS
The led RHYTHM will start blinking
indicating that the GEP 50 is ready to
begin editing the rhythm parameters.
The led RHYTHM will light off
indicating that the GEP 50
returned to its previous state.
The adjusted level will be
shown for brief seconds.
The led RHYTHM will light up
indicating when it has been activated.
The adjusted level will be
shown for brief seconds.
RHYTHM TEMPO
Each dot exhibited under
the display represent the
addition of 100 BPM
over the TEMPO.
TEMPO=40 BPM
TEMPO=140 BPM
TEMPO=240 BPM
