6
Playing and Exploring Patches on GEP 50
Turning on the GEP 50
1
Connect the adapter AC plug in Jack DC IN then plug it into a socket.
2
Connect the guitar's cable in Jack INPUT.
3
Connect one end of the plug of another guitar's cable in Jack
Output/Phones and the other end to your amplifier.
In case you decide to not use an amplifier, you can connect headphones in
this jack.
4
Turn on your amplifier and adjust it according to your personal taste.
HINT:
If you keep the footswitch pressed down it will enter the automatic mode.
The value of the MASTER LEVEL will be exhibited on
the display while [Encoder2] is turned. After adjusting
the desired value, the display will return to its previous
state and will exhibit the current patch number. The
MASTER LEVEL ranges from 00-99.
RHYTHM TEMPO
Factory Patches
To access GEP 50's patches, follow the instructions below:
1
Turn [Encoder1] in order for it
to enter PLAY Mode.
The number of the selected
patch will be exhibited in the
display.
TAP
SW EFF
BYPASS
2
Use the footswitches to select the patches. Once Footswitch
[UP] is pressed, the next patch will be selected and, by pressing
the footswitch [DOWN] the previous patch will be selected again.
3
Turn [Encoder2] to change the
Master Level.
