background image

Oneida Air Systems

16

Warranty Information

Limited Warranty – Activate online at oneida-air.com/warranty

Oneida Air Systems®, Inc. (OAS) warrants the Dust Deputy for a period of 1 year, to the original purchaser from the date of purchase, 
unless otherwise specified. Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties. All 
electrical items such as magnetic starters, remotes, sensors, pumps, bin sensors, bag grippers, etc. and accessories are limited to 90 days. 
Oneida Air Systems warrants that the product will be free from defects in materials and workmanship.

This is Oneida Air Systems’ sole written warranty and any and all warranties that may be implied by law, including any merchantability 
or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. Oneida Air Systems does not warrant 
or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. This warranty 
does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs, alterations, improper wiring or lack of 
maintenance. In no event shall Oneida Air Systems’ liability under this warranty exceed the purchase price paid for the product and any 
legal actions brought against Oneida Air Systems shall be tried in the State of New York, County of Onondaga.

The buyer is cautioned to install and operate Dust Collectors in accordance with prescribed Federal, State, OSHA, NFPA, local codes 
and regulations. This equipment should be installed/wired by a licensed electrician following all applicable codes. Local codes can be 
significantly different from national codes. The customer assumes the responsibility for contacting their insurance underwriter with 
regard to specific application requirements of venting or if additional fire protection and safety equipment may be required. Oneida Air 
Systems shall in no event be liable for death, injuries to persons or property or for incidental, and contingent, special, or consequential 
damages arising from the use of our product.

Oneida Air Systems makes every effort to accurately represent our products and prices, however Oneida Air Systems reserves the 
right to make changes to products and prices at any time. As a manufacturer, Oneida Air Systems reserves the right to change product 
specifications at any time in an effort to achieve better quality products.

SAFETY WARNING - PLEASE READ

Before Purchasing or Installing a dust collection system the buyer is cautioned to do so in accordance with prescribed Federal, State, 
Local, OSHA, NFPA, and any other applicable codes or regulations relating to the type of dust(s) you are collecting.

SOME TYPES OF DUST UNDER CERTAIN CONDITIONS HAVE THE POTENTIAL TO BE EXPLOSIVE. 

Oneida Air Systems is not responsible for how the dust collector is used or installed. Dusts with deflagration or explosion risks, such as 
wood dust, may require additional safety equipment including but not limited to; venting, spark detection, suppression systems, back 
draft dampers or may require installation in an outside location or in a protected area away from personnel. The customer assumes the 
responsibility for contacting their insurance underwriter with regard to specific engineering controls or application requirements. (We 
suggest you reference NFPA 664, 654 and 68 codes for more information) Oneida Air Dust Collection Systems may not be suitable for 
some applications and are not designed to be used in explosive atmospheres. Oneida Air Systems equipment should only be installed and 
wired by a licensed electrician following all applicable local and national electrical codes. 

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause 
cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead-based paints; Crystalline silica 
from bricks, cement and other masonry products; Arsenic and chromium from chemically-treated lumber; etc.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, 
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter 
out microscopic particles. Oneida Air Systems recommends using additional approved safety equipment such as an approved OSHA and 
NIOSH dust mask or respirator.

ONEIDA AIR SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO 
PERSONS OR PROPERTY OR FOR INCIDENTAL, AND CONTINGENT, SPECIAL, OR 

CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCT. 

Содержание Dust Deputy AXD001004





















Отзывы: