5
Dust Cobra Owner’s Manual O.A.S. 2010
c
IV. Dimensions
48”
52”
26”
17”
20”
All dimensions are approximate.
with cart
If you replace the filter it is imperative that you use a Cleanstream
®
Pro HEPA filter #09085
(OAS # FCH000002) and not their non-HEPA filter. Otherwise it will not be a certified unit.
Vacuum hose for
plastic bag hold-down.
Connection for
optional Dust
Sentry™
If you purchase a Gore Cleanstream filter from someone other than Oneida or Cleanstream’s website, the filter
you purchase may have a domed top with no hole. There is an easy fix for this. You must carefully drill a 5/16”
diameter hole in the center of the dome. Be very careful not to crack the plastic and be sure to remove any burrs.
You may find that the included bolt is now too small to hold the filter. If this is the case, purchase a 5/16-18
hex head bolt at least 3 1/2” long and replace the original 2 1/2” long bolt being sure to tighten the nut well. It is
important to continue to use the foam gasket seal on the fender washer to assure there isn’t any dust bypassing
the filter.