Oneida Air Systems AXD000009, Руководство пользователя

Страница: 5 / 12

19 4
Dust Deputy® Owner’s Manual © 2010 Dust Deputy® Owner’s Manual © 2010
III. Ultimate Kit Contents
Ultimate Dust Deputy® - AXD000009
Dimensions
31”/ 787.4mm
15 1/2”/
393.7mm
Width
11 1/2”/
292.1mm
Box Capacity
is 9 Gallons /
34.2 Liters
16”/ 406.4mm
Metal
tape
Metal
tape
The included metal tape
can be used as shown on
the connectors to ground
them.
- Adaptor, Cuff 2.5” - 2.25” (1) AXD250225
- Elbow 2.5” w/ valve (1) AXD600101
* Optional Elbow 2.5” (1) AHA000004
- Rubber T-Latches (2) AFL000007
- Gasket for Cyclone (1) AXG000004
- Gasket Neoprene (4 ft.) RGZ000000
- Foam reticulated (6”) RMF000060
- 9 gal. Molded Box (1) SDS090000
- Hose 2.5” x 5.5’ (1) AXD250066
- Shut Off Valve (1) AXD600000
- Tubing 1/4” (3 ft.) AXD600200
- Plastic bags (3) AXD600300
- Anti-Static Metal Tape (12”) VFA050015
- Plastic Cyclone (1) VXC110002
- Hardware AHK000009
- 1/4 - 20 x 3/4” Mach. Screw (6)
- 10 - 32 x 1” Mach. Screw (4)
U.S. Patent #7,282,074 C1
U.S. Patent #D668409
U.S. Design Pat.
App. # 29/358,526
29/358,497
29/342,738
XII. Troubleshooting
To Prevent Hose Pull Off
Dust Deputy® not separating well. (Only a tiny amount of dust should reach the
vacuum.)
Wrap the inlet and outlet of the Dust Deputy with a layer of electrical tape
to increase the friction fit.
Use the included hose clamp and hose retention ring as shown on pg.10.
Secure with a sheet metal screw.
Low air volume.
Material swirls in cyclone and won’t drop down into drum.
Hose connections not tight.
Air leak. Check cyclone flange / drum lid / barrel. Even small leaks
will affect performance.
Vacuum filter clogged. Blockage in hose.
Air leak in bottom of cyclone / drum lid or dust drum.
Large, bulkier material might swirl. Restart or temporarily cut off air flow to
drop material down.
Due to the varied hose diameters, flexible couplers
can be used. They are available at local hardware
stores in the plumbing section.
The inlet and outlet of the Dust Deputy® are shouldered and tapered to adapt
to a range of vac hose sizes. If on your model the friction fit isn’t as tight as
needed you can do the following: