5- Midi Channel setup and Tap Tempo Control
Each midi channel can be turned off separately, if a midi channel is turned off, its
index number will not be present in a preset edit, it helps to speed up the preset edit.
Hold the
“
SETUP/DOWN
”
switch and power on Gecko, it starts to setup midi channel 1,
UP and DOWN switch change the tap tempo control number (0~127), or turn off the
midi channel
“
oF
”
, or midi channel on but no tap tempo control number
“
--
”
, when midi
channel 1 setup is done, press OK to go the next midi channel setup. Hold
“
OK
”
switch
to quit the setup.
Each midi channel can also be assigned with a tap tempo control number, which will
be sent when
“
OK
”
switch is continuously pressed. This allows Gecko to set tap
tempo of more than one (max. 16) midi devices at the same time.
Midi channel 1 on, tap tempo control number is 93
Midi channel 3 on, tap tempo disabled
Midi channel 12 off
6- Factory Reset
Factory reset erases all the user data and restore the factory data.
Hold the
“
UP/RESET
”
switch and power up the Gecko, it
enters factory reset operation, use
“
DOWN
”
switch to
select
“
y
”
(yes) or
“
n
”
(no), hold
“
OK
”
switch if
“
y
”
is selected,
Gecko will count down 5 seconds then erase the user data
and restore the factory data.
Dimensions....................................120(W) x65(D)X46(H)mm
Weight...............................................................................400g
Power Supply......................................................................DC9V
Current Drain (EXT. DC power supply) .......................max. 25mA
Current Drain (Battery)............................................ less than 1mA
7- Specifications
Video tutorial link
Video tutorial link
Video tutorial link
4
