![OneControl Gecko MK III Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/onecontrol/gecko-mk-iii/gecko-mk-iii_user-manual_1635467003.webp)
3
3- Operation Modes
Three operation mode: Preset Pick mode, Preset immediate mode, Direct mode.
Preset Pick mode - Setup code E1", the screen preset area displays the number of
the preset, DOWN
"
"
"/ "UP" switch selects the preset, the PC# in the preset will not
be sent until the "OK" switch is pressed.
PS: Only the PC1# on midi channel 1 will be displayed on the screen.
Preset immediate mode - Setup code E2",
"
the screen preset area displays the number
of the preset, "DOWN"/"UP" switch selects the preset, the PC# will be sent immidiately.
PS: Only the PC1# on midi channel 1 will be displayed on the screen.
Direct mode: Setup code E3", the screen preset area displays
“
d
”
, DOWN
"
"
"/ "UP"
switch change the PC# which is sent immidiately on all16 midi channels.
(Preset 7, PC1# is 102)
Example 1 Preset Pick Mode
(Preset 13, PC1# is 195)
Example 2 Preset Immidiate Mode
( PC#93 sent on all midi channels)
Example3
Direct Mode
User can setup the favorite operation mode as following steps - Hold the
“
OK/mode
”
switch and power on the Gecko, the screen will show current operation mode
E1/E2/E3, press
“
DOWN
”
/ UP
”
switch to change the mode code, hold
“
OK
”
to quit
setup.
“
4- Edit a Preset
In Preset pick/immediate mode, when a preset is recalled, hold
“
OK
”
footswitch for
2 seconds, Gecko starts to edit the PC# on midi channel 1, UP
"
"/"DOWN" switch
changes the number, "OK" switch confirms the change, then goes to the PC# on
the next midi channel. The PC# range is 0~199, and
“
off
”
, the PC# will not be sent on
its channel if the PC# is set to
“
off
”
. Hold "OK" any time will quit preset edit.
Edit PC# on
Midi Channel 1
Hold
“
OK
”
Press
“
OK
”
Edit PC# on
Midi Channel 2
Press
“
OK
”
Edit PC# on
Midi Channel 16
Press
“
OK
”
Hold
“
OK
”
to quit
Video tutorial link