oneConcept 10030456, Руководство пользователя

Страница: 8 / 9

8
3. Meanwhile use your other hand to turn the knob clockwise and then open the safe.
4. Turn the key clockwise, then take off the key and keep it.
Install the batteries
This product is battery operated,Only use 1.5V Alkaline AA batteries. To install the batter-
ies, remove the battery cover plate at the back of the door and install the four batteries.
Ensure the + and – positions are correct.
Change the user code
1. with door open, press the red button on the back of door, you will hear two beeps
and yellow light on (10 seconds).
2. Input a new code of 3 to 8 digits, then press “B” button. The storage of the new user
code will be confirmed by two beeps.
Open the safe
1. Input your code.
2. Press “B” button, the green light will turn on with 2 beeps.
3. Turn the knob clockwise.
4. Within 5 seconds while green light on, the door is opened.
Each key being pressed is indicated with a buzzer and a yellow flashing light.
If the entered code is invalid then the yellow light will flash and the buzzer will quickly
beep and the user should enter the correct one again.
Lock warning
Entering an incorrect code 3 times will freeze the system for 20 seconds.
LOW-BAT warning
Once you see the red light turn on when open the safe , the batteries should be changed
immediately.
Close the safe
Turn the knob counter-clockwise, the mechanism will automatically lock the safe.
Override key
For your convenience, we have engineered a manual override system for your safe; we
have supplied 2 sets of override keys. These keys allow you to open the safe at all times,
even when the batteries are run down or when you have forgotten your code. In the event
the keys are lost, contact the dealer for a duplicate. The key number is a sticky label inside